Products
Specification introduction of GH50 horizontal reduction motor
1. Rated power: 750W-3700W
2. Rated output torque: 800N.m-18000N.m
3. Rated output speed: 3r/ min-1800R /min
4. Transmission ratio: 3~1800rpm
5. Voltage level: Single-phase 110/220V, 50/60HZ 1-Phase
Three-phase 220/380V, 50/60HZ 3-Phase
6. Installation mode: horizontal foot installation
7. Working environment temperature: -40℃ to +45℃
8. Use conditions: The altitude does not exceed 1000m, the relative humidity of the air is not greater than 95%, no corrosive gas and open flame.
9. Selection of accessories: brake
GH50 horizontal reduction motor has the characteristics of compact structure, low noise, high transmission efficiency, large output torque, etc., which has been widely used in steel, cement, chemical industry, textile, paper making, metallurgy and other fields.
FAQ
1. Q: The role of the geared motor
A: China reduction motor increases the output torque and reduces the inertia of the load through deceleration.
2. Q: Can the reduction motor speed regulation?
A: YUSIN reduction motor motor can be adjusted by installing a frequency converter.
3. Q: The installation method of the reduction motor
A: China reduction motor is a one-piece installed motor, and there are two installation methods, horizontal or vertical.
